TPC27//PDF//8-22
TPC27//PUFF BACK JACKET
The latest pattern in the Trend Patterns range, a casual slightly oversized jacket with a gathered back adding a unique detail. Inspired by a Marni Jacket Lucy (Trend Patterns Chief) lusted after over the internet and recreated, this pattern is being released after a lot of requests.
Included:
Tiled A0 pattern in size 8-22
Tiled A4 pattern in size 8-22
Instruction booklet
File Info
The A4 version is made up of 64 pages. When printing select "Actual Size" in Print setup. A 10cm x 10cm square is included within the file (page4). Measure this to check the file is printing to accurate measurements
All pages are numbered and have a "map" (page30) to show the full plan of the file.
All pages have an overlap of approximately 1.5cm, 1/2", and a dashed line boarder. This will enable you to accurately match each page.
THE A4 VERSION CAN BE PRINTED ON US LETTER. Do not change the scale, and where possible print centrally on the paper selecting boarder less printing. The overlap will be smaller but the overlap lines will appear in the page.
A0 version is made up of 4 pages.
The download will be sent via email, the link will expire 24hours after you first click to open it.
Strictly no refunds.
You will also need: Based on size22
280cm of fabric - based on a width of 140cm
200cm of lining - based on a width of 140cm
4 Buttons
80cm of fusible based on a width of 90cm
Jacket features are a laid on sleeve, meaning the body and sleeve are all in one. Gathered back detail. Pockets with a welt detail. And it’s fully lined.
The booklet accompanying this pattern includes step by step make instructions with detailed illustrations. Lay plans to help you cut the pattern out and a selection of fabric widths by pattern size.
There are finished garment measurements inside the booklet in centimetres and inches to help you decide which size to make. We think the jacket is true to size, but you could go down 1 size if you want a neater looking silhouette. If you’re using a thicker fabric then choose your regular dress size.
The pattern includes a lining, however throughout the booklet there are steps to help you if you’re making a jacket without lining.
Difficulty
We have rated this pattern as Moderate. The Puff Back Jacket overall is fairly simple, however the pocket construction and attaching the lining can be tricky for some with less experience in sewing. It can be made without a lining if you wish. Follow the booklet and get in touch whenever you need help
TPC27//PUFF BACK JACKET
The latest pattern in the Trend Patterns range, a casual slightly oversized jacket with a gathered back adding a unique detail. Inspired by a Marni Jacket Lucy (Trend Patterns Chief) lusted after over the internet and recreated, this pattern is being released after a lot of requests.
Included:
Tiled A0 pattern in size 8-22
Tiled A4 pattern in size 8-22
Instruction booklet
File Info
The A4 version is made up of 64 pages. When printing select "Actual Size" in Print setup. A 10cm x 10cm square is included within the file (page4). Measure this to check the file is printing to accurate measurements
All pages are numbered and have a "map" (page30) to show the full plan of the file.
All pages have an overlap of approximately 1.5cm, 1/2", and a dashed line boarder. This will enable you to accurately match each page.
THE A4 VERSION CAN BE PRINTED ON US LETTER. Do not change the scale, and where possible print centrally on the paper selecting boarder less printing. The overlap will be smaller but the overlap lines will appear in the page.
A0 version is made up of 4 pages.
The download will be sent via email, the link will expire 24hours after you first click to open it.
Strictly no refunds.
You will also need: Based on size22
280cm of fabric - based on a width of 140cm
200cm of lining - based on a width of 140cm
4 Buttons
80cm of fusible based on a width of 90cm
Jacket features are a laid on sleeve, meaning the body and sleeve are all in one. Gathered back detail. Pockets with a welt detail. And it’s fully lined.
The booklet accompanying this pattern includes step by step make instructions with detailed illustrations. Lay plans to help you cut the pattern out and a selection of fabric widths by pattern size.
There are finished garment measurements inside the booklet in centimetres and inches to help you decide which size to make. We think the jacket is true to size, but you could go down 1 size if you want a neater looking silhouette. If you’re using a thicker fabric then choose your regular dress size.
The pattern includes a lining, however throughout the booklet there are steps to help you if you’re making a jacket without lining.
Difficulty
We have rated this pattern as Moderate. The Puff Back Jacket overall is fairly simple, however the pocket construction and attaching the lining can be tricky for some with less experience in sewing. It can be made without a lining if you wish. Follow the booklet and get in touch whenever you need help
TPC27//PUFF BACK JACKET
The latest pattern in the Trend Patterns range, a casual slightly oversized jacket with a gathered back adding a unique detail. Inspired by a Marni Jacket Lucy (Trend Patterns Chief) lusted after over the internet and recreated, this pattern is being released after a lot of requests.
Included:
Tiled A0 pattern in size 8-22
Tiled A4 pattern in size 8-22
Instruction booklet
File Info
The A4 version is made up of 64 pages. When printing select "Actual Size" in Print setup. A 10cm x 10cm square is included within the file (page4). Measure this to check the file is printing to accurate measurements
All pages are numbered and have a "map" (page30) to show the full plan of the file.
All pages have an overlap of approximately 1.5cm, 1/2", and a dashed line boarder. This will enable you to accurately match each page.
THE A4 VERSION CAN BE PRINTED ON US LETTER. Do not change the scale, and where possible print centrally on the paper selecting boarder less printing. The overlap will be smaller but the overlap lines will appear in the page.
A0 version is made up of 4 pages.
The download will be sent via email, the link will expire 24hours after you first click to open it.
Strictly no refunds.
You will also need: Based on size22
280cm of fabric - based on a width of 140cm
200cm of lining - based on a width of 140cm
4 Buttons
80cm of fusible based on a width of 90cm
Jacket features are a laid on sleeve, meaning the body and sleeve are all in one. Gathered back detail. Pockets with a welt detail. And it’s fully lined.
The booklet accompanying this pattern includes step by step make instructions with detailed illustrations. Lay plans to help you cut the pattern out and a selection of fabric widths by pattern size.
There are finished garment measurements inside the booklet in centimetres and inches to help you decide which size to make. We think the jacket is true to size, but you could go down 1 size if you want a neater looking silhouette. If you’re using a thicker fabric then choose your regular dress size.
The pattern includes a lining, however throughout the booklet there are steps to help you if you’re making a jacket without lining.
Difficulty
We have rated this pattern as Moderate. The Puff Back Jacket overall is fairly simple, however the pocket construction and attaching the lining can be tricky for some with less experience in sewing. It can be made without a lining if you wish. Follow the booklet and get in touch whenever you need help
