LB x TPC BALLOON TROUSER // PDF
LOVERBOY x TREND PATTERNS
The Loverboy Balloon Trousers are designed as a unisex item of clothing, with a wide dropped crotch to fit anyone. Change your sizing so they will sit higher on the waist, or lower towards the high hip for your desired fit.
They were designed with all the details of a pair of jeans, combined with a unique balloon silhoutte as the leg flares out at the knee.
File Info
This PDF is made up of both A4 and A0 files, and instruction booklet.
The A4 file is made up of 68 pages. When printing select "Actual Size" in Print setup. A 10cm x 10cm square is included within the file (page3). Measure this to check the file is printing to accurate measurements
All pages have an overlap of approximately 2cm, and a dashed line boarder. This will enable you to accurately match each page.
THE A4 VERSION CAN BE PRINTED ON US LETTER. Do not change the scale, and where possible print centrally on the paper selecting boarder less printing. The overlap will be smaller but the overlap lines will appear in the page.
The A0 file is made up of 4 pages
The download will be sent via email, the link will expire 24hours after you first click to open it.
Strictly no refunds.
Included:
A4 tiled PDF 68 pages
A0 tiled PDF 4pages
SIZES 26- 42
Instruction booklet
You will also need: Based on size 42
310Cm of fabric. 140cm wide..
50cm of lining. Any width and size.
Iron on Fuse 125cm based on 90cm width.
16cm Trouser zip.
Buttons 24L & 32L
The booklet accompanying this pattern includes step by step make instructions with detailed illustrations. Lay plans to help you cut the pattern out and a selection of fabric widths by pattern size.
There are finished garment measurements inside the booklet to help you decide which size to make. We think the Balloon Trousers is true to size.
The desired Fabric weight is Medium plus weight, don’t choose anything too thick..
Difficulty
This pattern as Moderate to Difficult. There is a traditional Fly construction on these trousers. Along with denim style pockets and a back pocket with a flap set in the back yoke seam. These details can be tricky so take your time if its your first time sewing this style of finish.
Follow the booklet and get in touch whenever you need help!
LOVERBOY x TREND PATTERNS
The Loverboy Balloon Trousers are designed as a unisex item of clothing, with a wide dropped crotch to fit anyone. Change your sizing so they will sit higher on the waist, or lower towards the high hip for your desired fit.
They were designed with all the details of a pair of jeans, combined with a unique balloon silhoutte as the leg flares out at the knee.
File Info
This PDF is made up of both A4 and A0 files, and instruction booklet.
The A4 file is made up of 68 pages. When printing select "Actual Size" in Print setup. A 10cm x 10cm square is included within the file (page3). Measure this to check the file is printing to accurate measurements
All pages have an overlap of approximately 2cm, and a dashed line boarder. This will enable you to accurately match each page.
THE A4 VERSION CAN BE PRINTED ON US LETTER. Do not change the scale, and where possible print centrally on the paper selecting boarder less printing. The overlap will be smaller but the overlap lines will appear in the page.
The A0 file is made up of 4 pages
The download will be sent via email, the link will expire 24hours after you first click to open it.
Strictly no refunds.
Included:
A4 tiled PDF 68 pages
A0 tiled PDF 4pages
SIZES 26- 42
Instruction booklet
You will also need: Based on size 42
310Cm of fabric. 140cm wide..
50cm of lining. Any width and size.
Iron on Fuse 125cm based on 90cm width.
16cm Trouser zip.
Buttons 24L & 32L
The booklet accompanying this pattern includes step by step make instructions with detailed illustrations. Lay plans to help you cut the pattern out and a selection of fabric widths by pattern size.
There are finished garment measurements inside the booklet to help you decide which size to make. We think the Balloon Trousers is true to size.
The desired Fabric weight is Medium plus weight, don’t choose anything too thick..
Difficulty
This pattern as Moderate to Difficult. There is a traditional Fly construction on these trousers. Along with denim style pockets and a back pocket with a flap set in the back yoke seam. These details can be tricky so take your time if its your first time sewing this style of finish.
Follow the booklet and get in touch whenever you need help!
LOVERBOY x TREND PATTERNS
The Loverboy Balloon Trousers are designed as a unisex item of clothing, with a wide dropped crotch to fit anyone. Change your sizing so they will sit higher on the waist, or lower towards the high hip for your desired fit.
They were designed with all the details of a pair of jeans, combined with a unique balloon silhoutte as the leg flares out at the knee.
File Info
This PDF is made up of both A4 and A0 files, and instruction booklet.
The A4 file is made up of 68 pages. When printing select "Actual Size" in Print setup. A 10cm x 10cm square is included within the file (page3). Measure this to check the file is printing to accurate measurements
All pages have an overlap of approximately 2cm, and a dashed line boarder. This will enable you to accurately match each page.
THE A4 VERSION CAN BE PRINTED ON US LETTER. Do not change the scale, and where possible print centrally on the paper selecting boarder less printing. The overlap will be smaller but the overlap lines will appear in the page.
The A0 file is made up of 4 pages
The download will be sent via email, the link will expire 24hours after you first click to open it.
Strictly no refunds.
Included:
A4 tiled PDF 68 pages
A0 tiled PDF 4pages
SIZES 26- 42
Instruction booklet
You will also need: Based on size 42
310Cm of fabric. 140cm wide..
50cm of lining. Any width and size.
Iron on Fuse 125cm based on 90cm width.
16cm Trouser zip.
Buttons 24L & 32L
The booklet accompanying this pattern includes step by step make instructions with detailed illustrations. Lay plans to help you cut the pattern out and a selection of fabric widths by pattern size.
There are finished garment measurements inside the booklet to help you decide which size to make. We think the Balloon Trousers is true to size.
The desired Fabric weight is Medium plus weight, don’t choose anything too thick..
Difficulty
This pattern as Moderate to Difficult. There is a traditional Fly construction on these trousers. Along with denim style pockets and a back pocket with a flap set in the back yoke seam. These details can be tricky so take your time if its your first time sewing this style of finish.
Follow the booklet and get in touch whenever you need help!
