LB x TPC Waistcoat // PDF
LOVERBOY x TREND PATTERNS
The Loverboy Waistcoat is designed as a versatile unisex item. Intentionally backless so it can be worn alone or over a Shirt or T-Shirt. When choosing your size check the “Width” measurement below to see how much of the waistcoat will cover your front. The Straps are adjustable, a maximum and minimum measurement is provided below next to “Back Straps”. Add the width and strap measurements, or an average measurement between the two, together for the total circumference.
It's double breasted with a collar and lapel, and little traditional Welt pockets
File Info
This PDF is made up of both A4 and A0 files, and instruction booklet.
The A4 file is made up of 18 pages. When printing select "Actual Size" in Print setup. A 10cm x 10cm square is included within the file (page3). Measure this to check the file is printing to accurate measurements
All pages have an overlap of approximately 2cm, and a dashed line boarder. This will enable you to accurately match each page.
THE A4 VERSION CAN BE PRINTED ON US LETTER. Do not change the scale, and where possible print centrally on the paper selecting boarder less printing. The overlap will be smaller but the overlap lines will appear in the page.
The A0 file is made up of 1 pages
The download will be sent via email, the link will expire 24hours after you first click to open it.
Strictly no refunds.
Included:
A4 tiled PDF 18 pages
A0 tiled PDF 1 pages
SIZES XS - 3XL
Instruction booklet
You will also need: Based on size22
1m of fabric. Any width and size.
50cm of lining. Any width and size.
1 x 4cm Slider.
10 x 24L Buttons.
2 x Jigger Buttons.
1m of fusible based on a width of 90cm.
It's double breasted with a collar and lapel, and little traditional Welt pockets
The booklet accompanying this pattern includes step by step make instructions with detailed illustrations. Lay plans to help you cut the pattern out and a selection of fabric widths by pattern size.
There are finished garment measurements inside the booklet to help you decide which size to make. We think the Waistcoat is true to size.
The desired Fabric weight is Medium weight.
The pattern includes a lining.
Difficulty
This pattern as Easy. The Waistcoat has a lot of small details and attaching the lining can be tricky .We would not recommend making this without a lining. Follow the booklet and get in touch whenever you need help!
LOVERBOY x TREND PATTERNS
The Loverboy Waistcoat is designed as a versatile unisex item. Intentionally backless so it can be worn alone or over a Shirt or T-Shirt. When choosing your size check the “Width” measurement below to see how much of the waistcoat will cover your front. The Straps are adjustable, a maximum and minimum measurement is provided below next to “Back Straps”. Add the width and strap measurements, or an average measurement between the two, together for the total circumference.
It's double breasted with a collar and lapel, and little traditional Welt pockets
File Info
This PDF is made up of both A4 and A0 files, and instruction booklet.
The A4 file is made up of 18 pages. When printing select "Actual Size" in Print setup. A 10cm x 10cm square is included within the file (page3). Measure this to check the file is printing to accurate measurements
All pages have an overlap of approximately 2cm, and a dashed line boarder. This will enable you to accurately match each page.
THE A4 VERSION CAN BE PRINTED ON US LETTER. Do not change the scale, and where possible print centrally on the paper selecting boarder less printing. The overlap will be smaller but the overlap lines will appear in the page.
The A0 file is made up of 1 pages
The download will be sent via email, the link will expire 24hours after you first click to open it.
Strictly no refunds.
Included:
A4 tiled PDF 18 pages
A0 tiled PDF 1 pages
SIZES XS - 3XL
Instruction booklet
You will also need: Based on size22
1m of fabric. Any width and size.
50cm of lining. Any width and size.
1 x 4cm Slider.
10 x 24L Buttons.
2 x Jigger Buttons.
1m of fusible based on a width of 90cm.
It's double breasted with a collar and lapel, and little traditional Welt pockets
The booklet accompanying this pattern includes step by step make instructions with detailed illustrations. Lay plans to help you cut the pattern out and a selection of fabric widths by pattern size.
There are finished garment measurements inside the booklet to help you decide which size to make. We think the Waistcoat is true to size.
The desired Fabric weight is Medium weight.
The pattern includes a lining.
Difficulty
This pattern as Easy. The Waistcoat has a lot of small details and attaching the lining can be tricky .We would not recommend making this without a lining. Follow the booklet and get in touch whenever you need help!
LOVERBOY x TREND PATTERNS
The Loverboy Waistcoat is designed as a versatile unisex item. Intentionally backless so it can be worn alone or over a Shirt or T-Shirt. When choosing your size check the “Width” measurement below to see how much of the waistcoat will cover your front. The Straps are adjustable, a maximum and minimum measurement is provided below next to “Back Straps”. Add the width and strap measurements, or an average measurement between the two, together for the total circumference.
It's double breasted with a collar and lapel, and little traditional Welt pockets
File Info
This PDF is made up of both A4 and A0 files, and instruction booklet.
The A4 file is made up of 18 pages. When printing select "Actual Size" in Print setup. A 10cm x 10cm square is included within the file (page3). Measure this to check the file is printing to accurate measurements
All pages have an overlap of approximately 2cm, and a dashed line boarder. This will enable you to accurately match each page.
THE A4 VERSION CAN BE PRINTED ON US LETTER. Do not change the scale, and where possible print centrally on the paper selecting boarder less printing. The overlap will be smaller but the overlap lines will appear in the page.
The A0 file is made up of 1 pages
The download will be sent via email, the link will expire 24hours after you first click to open it.
Strictly no refunds.
Included:
A4 tiled PDF 18 pages
A0 tiled PDF 1 pages
SIZES XS - 3XL
Instruction booklet
You will also need: Based on size22
1m of fabric. Any width and size.
50cm of lining. Any width and size.
1 x 4cm Slider.
10 x 24L Buttons.
2 x Jigger Buttons.
1m of fusible based on a width of 90cm.
It's double breasted with a collar and lapel, and little traditional Welt pockets
The booklet accompanying this pattern includes step by step make instructions with detailed illustrations. Lay plans to help you cut the pattern out and a selection of fabric widths by pattern size.
There are finished garment measurements inside the booklet to help you decide which size to make. We think the Waistcoat is true to size.
The desired Fabric weight is Medium weight.
The pattern includes a lining.
Difficulty
This pattern as Easy. The Waistcoat has a lot of small details and attaching the lining can be tricky .We would not recommend making this without a lining. Follow the booklet and get in touch whenever you need help!